During installation the body collapses on the back side which grips the inside of the mounting surface.
- Blind – install from one side
- Adds threads to thin sheets
- Thick-wall design for maximum strength
- Easy installation with manual or power tools
THREAD SIZE |
BASIC PART NUMBER* |
GRIP RANGE “G” |
BODY DIAMETER “A” |
HEAD DIAMETER “B” |
HEAD HEIGHT “C” |
OPEN END | CLOSED END | WORK HOLE DIAMETER |
DRILL SIZE |
|||
---|---|---|---|---|---|---|---|---|---|---|---|---|
LENGTH “L” |
REF. “H” |
LENGTH “E” |
REF. “F” |
REF. “J” |
||||||||
4-60 | .010-.060 | .155 | .270 | .025 | .345 | .230 | .500 | .385 | .230 | .155/.157 | 5/32 | |
4-85 | .060-.085 | .370 | .230 | .525 | .385 | .230 | ||||||
4-110 | .085-.110 | .400 | .230 | .555 | .390 | .230 | ||||||
4-135 | .110-.135 | .425 | .230 | .580 | .385 | .230 | ||||||
4-160 | .135-.160 | .450 | .230 | .605 | .385 | .230 | ||||||
4-185 | .160-.185 | .480 | .230 | .635 | .385 | .230 | ||||||
6-32 |
6-75 | .010-.075 | .189 | .325 | .032 | .438 | .300 | .625 | .490 | .405 | .189/.193 | #12 |
6-120 | .075-.120 | .500 | .315 | .625 | .440 | .355 | ||||||
6-160 | .120-.160 | .500 | .270 | .750 | .520 | .310 | ||||||
6-200 | .160-.200 | .562 | .290 | .750 | .480 | .260 | ||||||
6-240 | .200-.240 | .625 | .310 | .750 | .435 | .260 | ||||||
6-280 | .240-.280 | .687 | .330 | .812 | .455 | .265 | ||||||
8-32 |
8-75 | .010-.075 | .221 | .357 | .032 | .438 | .300 | .625 | .490 | .405 | .221/.226 | #2 |
8-120 | .075-.120 | .500 | .315 | .625 | .440 | .355 | ||||||
8-160 | .120-.160 | .500 | .270 | .750 | .520 | .310 | ||||||
8-200 | .160-.200 | .625 | .350 | .750 | .475 | .265 | ||||||
8-240 | .200-.240 | .625 | .305 | .875 | .555 | .310 | ||||||
8-280 | .240-.280 | .687 | .340 | .875 | .530 | .290 | ||||||
10-32 |
10-80 | .010-.080 | .250 | .406 | .038 | .531 | .380 | .781 | .630 | .380 | .250/.256 | E |
10-130 | .080-.130 | .594 | .390 | .843 | .640 | .390 | ||||||
10-180 | .130-.180 | .641 | .390 | .891 | .640 | .390 | ||||||
10-230 | .180-.230 | .703 | .395 | .953 | .645 | .395 | ||||||
10-280 | .230-.280 | .750 | .395 | 1.000 | .645 | .395 | ||||||
10-330 | .280-.330 | .797 | .385 | 1.047 | .630 | .385 | ||||||
1/4-20 |
25-80 | .020-.080 | .332 | .475 | .058 | .625 | .450 | .937 | .760 | .440 | .332/.388 | Q |
25-140 | .080-.140 | .687 | .450 | 1.000 | .760 | .440 | ||||||
25-200 | .140-.200 | .750 | .450 | 1.062 | .760 | .440 | ||||||
25-260 | .200-.260 | .812 | .445 | 1.125 | .755 | .445 | ||||||
25-320 | .260-.320 | .875 | .445 | 1.187 | .755 | .445 | ||||||
25-380 | .320-.380 | .937 | .445 | 1.250 | .755 | .445 | ||||||
5/16-18 |
31-125 | .030-.125 | .413 | .665 | .062 | .750 | .505 | 1.187 | .940 | .550 | .413/.423 | Z |
31-200 | .125-.200 | .875 | .555 | 1.281 | .960 | .555 | ||||||
31-275 | .200-.275 | .937 | .540 | 1.343 | .950 | .560 | ||||||
31-350 | .275-.350 | 1.032 | .560 | 1.437 | .965 | .570 | ||||||
31-425 | .350-.425 | 1.125 | .580 | 1.531 | .985 | .575 | ||||||
31-500 | .425-.500 | 1.187 | .565 | 1.593 | .975 | .580 | ||||||
3/8-16 |
37-115 | .030-.115 | .490 | .781 | .088 | .844 | .585 | 1.281 | 1.020 | .660 | .490/.500 | 12.5mm |
37-200 | .115-.200 | .938 | .595 | 1.375 | 1.030 | .670 | ||||||
37-285 | .200-.285 | 1.031 | .605 | 1.468 | 1.040 | .680 | ||||||
37-370 | .285-.370 | 1.125 | .615 | 1.562 | 1.050 | .690 | ||||||
37-455 | .370-.455 | 1.218 | .630 | 1.656 | 1.065 | .710 | ||||||
37-540 | .455-.540 | 1.312 | .635 | 1.750 | 1.075 | .715 | ||||||
1/2-13 |
50-150 | .050-.150 | .625 | .906 | .085 | .906 | .605 | 1.328 | 1.030 | .605 | .625/.635 | 5/8 |
50-250 | .150-.250 | 1.031 | .630 | 1.453 | 1.055 | .630 | ||||||
50-350 | .250-.350 | 1.141 | .640 | 1.562 | 1.060 | .640 | ||||||
50-450 | .350-.450 | 1.250 | .650 | 1.671 | 1.070 | .650 | ||||||
FIRST LETTER OF PART NUMBER: | LETTER BETWEEN DASH NUMBERS: | PART NUMBER EXAMPLES: |
“A” – Aluminum “S” – Steel “SS” – Stainless – Type 430 “NM” – Stainless – Type 300 “BR” – Brass |
“–” Open End Round Body “B” Closed End “K” Keyed “H” Full Hexagon Body |
A10-80 = Aluminum, Open End S25B140 = Steel, Closed End |
Metric Threads, Countersunk Heads and various finishes are available. Special sizes can be made to order. See page w69 for Setting Tools. |
About Rivet Nut Threaded Inserts
Rivet nuts, also known as threaded inserts or blind rivet nuts, are fasteners that provide a threaded hole in thin materials where it might be challenging to create threads by conventional methods. When using rivet nuts for thick walls, specific considerations must be taken into account.
The selection of rivet nuts should consider the material and thickness of the wall, ensuring a sound conjoining of the materials. They can be installed with manual or pneumatic tools with the standard method of drilling a hole, inserting the rivet, and compressing one end to make a secure connection.
When working with thick walls, it’s important to ensure that the rivet nut can effectively secure itself with the materials and provide the necessary strength for the intended use.
Also known as thick wall rivet nuts, heavy duty rivet nuts, high strength rivet nuts, deep reach rivet nuts, extended body rivet nuts, thick material threaded inserts, rivet nuts for thick metal, industrial thick wall inserts.